Project Logs

Project Central! All/Most/MaybeAFew of the projects i'm working on will be logged here. i will try and keep detailed logs on what i'm working on, and keep them in order, but no promises.

--Ongoing projects are being logged at the Ongoing Projects Page

most of these are going to be incomplete, ugly, and dumb. but pr*ct*ce m*kes p*rfect amirite. stars, too, have their own beginnings, but their own power results in their destruction. also alot of the farther down logs (besides the very first (real) one) will just be picture showcases as i can't be bothered to write 25+ logs retro-actively

note: only the ones denoted with [read more] have any helpful information, [look more] means jus sum pics

Tall cap

2 days

  1. a completley unecessarily tall keycap, printed for unknown purposes and use for unknown purposes
  2. Status: [Completed]

All in One

2 days

  1. an all in one raspberry pi joystick arcade running retropi and a couple thousand roms on various systems~
  2. Status: [Completed]

Arcade Cntrlr

2 days

  1. a controller so i can play tetris on my computer! this one is alot cleaner than my all-in-one in terms of construction
  2. Status: [Completed]

433% Keyboard

3 days

  1. the biggest keyboard undertaking i have ever attempted, 450 keys (technically) so im calling it a 433%.
  2. Status: [Completed]

Manuform-002

3 days

  1. the classic dactyl manuform with a wonderfully gel-ly wrist rest, not doing proper split cabling
  2. Status: [Completed]

Manuform-003

3 days

  1. the classic dactyl manuform but with a twist, actually wiring the split cable (nope...)
  2. Status: [Completed]

Xbox One HOTAS

2 days

  1. the loveely creation of u/moinen on reddit, xbox one compatible throttle and joystick with snap joints and easy assembly
  2. Status: [Completed]

crnkbds

4 days

  1. quite a poppin deal for hotswap pcbs, 3d printed case for one, plates for the other, two in one, yet still awful picture..
  2. Status: [Completed]

Karambit

2 days

  1. i simply wanted to make a csgo knife prop, nothing more than that~ i learned about properly painting with acrylics, oops
  2. Status: [Completed]

Mikuyboard

6 months

  1. quite the journey for this one, was more work than it may have been worth, but i still love it!~
  2. Status: [Completed]

Box Miku

1 day

  1. i had these prints sitting around forever and had to get them painted, im still not so good at painting huh
  2. Status: [Completed]

WiiTea

1 day

  1. this project was pre-photobooth so i thought it best to keep the pictures i took back then, finally logged it, original name was Cutii (Like cute plus wii) but sadly cut is a word ;;
  2. Status: [Completed]

S'more

1 day

  1. had this pcb lying around for way too long, had enough parts to fully complete it, decided to make it into something delicious! marshmellos not included~
  2. Status: [Completed]

2B

1 day

  1. YorHa No. 2 Type B is my waifu and the best character! i will touch up the paint later, but i think it turned out alright for my second real painting job!
  2. Status: [Completed]

9S (Nines)

1 day

  1. YorHa No. 9 Type S is amazing and i wasnt able to capture that but it was my first test doing full painting with brushes, it was an attempt!
  2. Status: [Completed]

Dactyl Knight

2 days

  1. featuring figurines! this is my first attempt painting, and i used some caps from a cashier cherry keeb, but i thought everything worked out well~
  2. Status: [Completed]

Elytra

1 day

  1. Second full 3d printed handwire... i didn't have the right screws, so i gave it ugly caps, i consider this one a failure, but i cant learn without mistakes!
  2. Status: [Completed]

Quarandream

2 days

  1. Quarantine gave me some more free time, i put my skills to the test to make my best custom yet~ i love it!!!~
  2. Status: [Completed]

Compaq MX11800

????

  1. beautiful, sa miami nights, and a trackball - was much harder to get one with a trackball than with a trackpad.
  2. Status: [Completed]

Gergo

????

  1. the gergo is basically the reinvention of the wheel. this layout and these caps are amazing; covered with lubed c3 tangerines~
  2. Status: [Completed]

Navi10

????

  1. anime keycaps, with a name like navi i immediately think serial experiments lain, so had to find something similar!~
  2. Status: [Completed]

Leopold FC980C

????

  1. topre isnt all its chalked up to be, but it is darn comfy and clean. maybe i am supposed to do the mods? pshhhh that can't be it
  2. Status: [Completed]

GH60

????

  1. this was all the hype when i started, the gh60 and some wooden case. pearlwood is nice and japanese sublegends are definitely needed shhhhhh
  2. Status: [Completed]

Ut47.2

????

  1. a fine keyboard layout, a nice case, what more does a small board need?~ apparently to be covered in pretty keycaps
  2. Status: [Completed]

Butterstick

????

  1. a smol keyboard of sorts, a butterstick covered in chocolate. make sure to measure the right amount of cups! butter is best served with chocolate~
  2. Status: [Completed]

Keeblade

██████

  1. for those of you who fight and type, the keeblade has got all of your bases covered, one of my personal favs, with zeal sakurios switches baby
  2. Status: [Completed]

Tofu HHKB

????

  1. pretty pretty pretty, i like this one alotsy! nobody needs a ctrl key, but actually it has one the capslock is a lie. hehe!~
  2. Status: [Completed]

Steno

????

  1. A noice split too bad i don't know stenography, its such a pretty lookin board; my max speed could be way faster~
  2. Status: [Completed]

Tokyo Cherry

????

  1. tokyo nights on a good ol cherry board. the trackpad is pretty epic but no where near as kewl as a trackball.
  2. Status: [Completed]

IBM M122

????

  1. Got this for a very good deal online, but it is a terminal board, so a little arduino magic and some soarers converter and its working now~
  2. Status: [Completed]

IBM Model M

????

  1. Also got this for a very good deal online, but it wasn't working when i got it. Also a little arduino magic and some soarers converter and its also working now~
  2. Status: [Completed]

Marthl

????

  1. this one is called marthl, the kaps are kute but the black backinground isnt the best. tis alrighty alrighty tho
  2. Status: [Completed]

Dz65 Rgb

????

  1. rgb not included, 65%s are really nice tho cuz unlayed arrow keys are a must in anyone's life, especially mine~
  2. Status: [Completed]

Tarnish 4t

????

  1. not much to say about this one, its got hot swappable sockets and no numpad. shrug shrug shrug~
  2. Status: [Completed]

R/B Sli

????

  1. oki doki, dont hate the player hate the keycaps, 104 isnt my style anymore but i did customize this one yes. tis a big clicky
  2. Status: [Completed]

Ducky MIYA

????

  1. a prebuild, not a custom, but i love it anyway cuz its pretty and i lubed the switches; sakura keycaps are v cute~
  2. Status: [Completed]

Ducky Mini

????

  1. One of my first more 'customs' tis pretty when lit up, at least its better than a prebuild, and its got a custom artisan, thats kinda cute ♡
  2. Status: [Completed]

Fruits Twos

????

  1. one of my nicer looking larger hand wire attempts (at the time of writing) yes the number two is entirely optional when counting~
  2. Status: [Completed]

HW Marble

????

  1. A handwired macropad with a set of 3d printed keycaps, all running on a good ol pro micro with qmk firmware flashed~
  2. Status: [Completed]

Tern Duale

????

  1. A keypad for undertale exclusively, with some chocolate and navy sa caps, sa is really my favorite style!~
  2. Status: [Completed]

Suitcase-Pc

4 hours

  1. Desktop cases are overrated, they are called portable computers for a reason. Introducing the Suitcase-Computer [Name Pending].
  2. Status: [Completed]

Deskless

1 day (142)

  1. So who needs a desk anyway? Tired of wasting space with a desk? I wasn't, but i made this anyway. Inspired by u/HardAsMagnets Stenography for all!~
  2. Status: [Completed]

Numpad

1 day

  1. I made a 17 key numpad, that i handwired, 3d printed, and used maxkey sa choclate keycaps, programmed with qmk firmware and love
  2. Status: [Completed]

Place-Holder

██████ years

  1. Download here: https://███████.com/placeholder
  2. Full of kn████dge
  3. Enitrely new
  4. Connections from ██████ to home.
  5. Listen forever, forever, forever
  6. ███████
  7. Explanation explanation explanation explanation
  8. Entirely artificial, like the stars
  9. Connection 01 - running - failed . . .
  10. Not much to see, not much to ████/li>
  11. Not connected to SCP
  12. Breathing life, scaling
  13. Redacted - █████

[ Back to Top ]